KTI Networks KGS-2421 User Manual Download Page 22

Page: 22 / 147

-22-

separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a

special syntax that can be used as a shorthand way of representing multiple 16-bit

groups of contiguous zeros; but it can only appear once. It also used a following

legally IPv4 address. For example, '::192.1.2.34'.

Trap Authentication Failure Indicates the SNMP entity is permitted to generate authentication failure traps.

Possible modes are:

Enabled:

Enable SNMP trap authentication failure.

Disabled:

Disable SNMP trap authentication failure.

Trap Link-up and Link-down Indicates the SNMP trap link-up and link-down mode operation. Possible modes are:

Enabled:

Enable SNMP trap link-up and link-down mode operation.

Disabled:

Disable SNMP trap link-up and link-down mode operation.

Trap Inform Mode

Indicates the SNMP trap inform mode operation. Possible modes are:

Enabled:

Enable SNMP trap inform mode operation.

Disabled:

Disable SNMP trap inform mode operation.

Trap Inform Timeout

Indicates the SNMP trap inform timeout (seconds). The allowed range is

0 ~ 2147

Trap Inform Retry Times

Indicates the SNMP trap inform retry times. The allowed range is

0 ~ 255

Trap Probe Security Engine ID Indicates the SNMP trap probe security engine ID mode of operation. Possible values are:

Enabled:

Enable SNMP trap probe security engine ID mode of operation.

Disabled:

Disable SNMP trap probe security engine ID mode of operation.

Trap Security Engine ID Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using

USM for authentication and privacy. A unique engine ID for these traps and informs

is needed. When "Trap Probe Security Engine ID" is enabled, the ID will be probed

automatically. Otherwise, the ID specified in this field is used. The string must

contain an even number between 10 and 64 hexadecimal digits, but all-zeros and

all-'F's are not allowed.

Trap Security Name

Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for

authentication and privacy. A unique security name is needed when traps and informs

are enabled.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands