KTI Networks KGS-2421 User Manual Download Page 25

Page: 25 / 147

the allowed string length is 8 to 32. For SHA authentication protocol, the allowed

string length is 8 to 40. The allowed content is the ASCII characters from 33 to 126.

Privacy Protocol

Indicates the privacy protocol that this entry should belong to. Possible privacy

protocols are:

None:

None privacy protocol.

DES

An optional flag to indicate that this user using DES authentication protocol.

Privacy Password

A string identifying the privacy pass phrase. The allowed string length is 8 to 32, and

the allowed content is the ASCII characters from 33 to 126.

Add new user

Click to add a new SNMPv3 user entry as shown below.

Delete

Click to cancel the new entry.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

-25-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands