KTI Networks KGS-2421 User Manual Download Page 62

Page: 62 / 147

Screen of 16-Port Switch

By default, dynamic entries are removed from the MAC after 300 seconds. This removal is also called aging.

Aging Configuration

Description

Disable Automatic Aging Check to disable aging for MAC address entries.

Aging Time

Configure aging time by entering a value here in seconds

Valid values:

10 to 1000000 seconds

Port MAC Table Learning

Auto

Learning is done automatically as soon as a frame with unknown SMAC is received.

Disable

No learning is done.

-62-

Secure

Only static MAC entries are learned, all other frames are dropped.

Note: Make sure that the link used for managing the switch is added to the Static

Mac Table before changing to secure learning mode, otherwise the management link

is lost and can only be restored by using another non-secure port or by connecting to

the switch via the serial interface.

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands