KTI Networks KGS-2421 User Manual Download Page 98

Page: 98 / 147

3.3.1.1 Port Security

3.3.1.1.1 Switch

Configuration Description

User Module Name

The full name of a module that may request Port Security services.

Abbr

A one-letter abbreviation of the user module

This is used in the Users column in the port status table.

Port

The port number for which the status applies. Click the port number to see the status

for this particular port.

Users

Each of the user modules has a column that shows whether that module has enabled

Port Security or not. A '-' means that the corresponding user module is not enabled,

whereas a letter indicates that the user module abbreviated by that letter (see Abbr)

has enabled port security.

MAC Count

Indicate the number of currently learned MAC addresses (forwarding as well as

blocked) on the port. If no user modules are enabled on the port, a dash (-) will be

-98-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands