KTI Networks KGS-2421 User Manual Download Page 109

Page: 109 / 147

3.5 Spanning Tree

3.5.1 Bridge Status

Configuration Description

MSTI

The Bridge Instance. This is also a link to the

STP Detailed Bridge Status

Bridge ID

The Bridge ID of this Bridge instance.

Root ID

The Bridge ID of the currently elected root bridge.

Root Port

The switch port currently assigned the

root

port role.

Root Cost

Root Path Cost. For the Root Bridge this is zero. For all other Bridges, it is the sum of

the Port Path Costs on the least cost path to the Root Bridge.

Topology Flag

The current state of the Topology Change Flag for this Bridge instance.

Topology Change Last The time since last Topology Change occurred.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to refresh the page; any changes made locally will be undone.

-109-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands