KTI Networks KGS-2421 User Manual Download Page 119

Page: 119 / 147

-119-

Total Neighbors Entries Deleted

Shows the number of new entries deleted since switch reboot.

Total Neighbors Entries Dropped

Shows the number of

LLDP

frames dropped due to that the entry table was full.

Total Neighbors Entries Aged Out

Shows the number of entries deleted due to Time-To-Live expiring.

Local Counters

Local Port

The port on which LLDP frames are received or transmitted.

Tx Frames

The number of LLDP frames transmitted on the port.

Rx Frames

The number of LLDP frames received on the port.

Rx Errors

The number of received LLDP frames containing some kind of error.

Frames Discarded

If an LLDP frame is received on a port, and the switch's internal table has run full,

the LLDP frame is counted and discarded. This situation is known as "Too Many

Neighbors" in the LLDP standard. LLDP frames require a new entry in the table

when the Chassis ID or Remote Port ID is not already contained within the table.

Entries are removed from the table when a given port links down, an LLDP shutdown

frame is received, or when the entry ages out.

TLVs Discarded

Each LLDP frame can contain multiple pieces of information, known as TLVs (TLV

is short for "Type Length Value"). If a TLV is malformed, it is counted and

discarded.

TLVs Unrecognized

The number of well-formed TLVs, but with an unknown type value.

Org. Discarded

The number of organizationally TLVs received.

Age-Outs

Each LLDP frame contains information about how long time the LLDP information

is valid (age-out time). If no new LLDP frame is received within the age out time, the

LLDP information is removed, and the

Age-Out

counter is incremented.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to refresh the page; any changes made locally will be undone.

Clear

Click to clear all counters.

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands