KTI Networks KGS-2421 User Manual Download Page 112

Page: 112 / 147

CIST Role

The current STP port role of the CIST port. The port role can be one of the following

values:

AlternatePort, BackupPort, RootPort, DesignatedPort.

CIST State

The current STP port state of the CIST port. The port state can be one of the

following values:

Blocking, Learning, Forwarding.

Uptime

The time since the bridge port was last initialized.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to refresh the page; any changes made locally will be undone.

3.5.3 Port Statistics

Configuration Description

Port

The switch port number of the logical RSTP port.

RSTP

The number of RSTP Configuration BPDU's received/transmitted on the port.

STP

The number of legacy STP Configuration BPDU's received/transmitted on the port.

TCN

The number of (legacy) Topology Change Notification BPDU's received/transmitted

on the port.

Discarded Unknown

The number of unknown Spanning Tree BPDU's received (and discarded) on the

port.

Discarded Illegal

The number of illegal Spanning Tree BPDU's received (and discarded) on the port.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to refresh the page; any changes made locally will be undone.

-112-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands