KTI Networks KGS-2421 User Manual Download Page 127

Page: 127 / 147

4.3 Copper Cable

Status Description

Port

The port where you are requesting Copper Cable Diagnostics.

All:

select all ports

Cable Status

Port:

Port number.

Pair:

The status of the cable pair. Pair A, B, C, D

Length:

The length (in meters) of the cable pair.

Start

Click to run the diagnostics. This will take approximately 5 seconds. If all ports are

selected, this can take approximately 15 seconds. When completed, the page

refreshes automatically, and you can view the cable diagnostics results in the cable

status table. Note that the diagnostics is only accurate for cables of length 7 - 140

meters.

10 and 100 Mbps ports will be linked down while running cable diagnostics.

Therefore, running diagnostics on a 10 or 100 Mbps management port will cause the

switch to stop responding until the diagnostics is complete.

-127-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands