KTI Networks KGS-2421 User Manual Download Page 95

Page: 95 / 147

3.2.4 Detailed Statistics

Configuration Description

Receive Total and Transmit Total

Rx and Tx Packets

Number of received and transmitted (good and bad) packets.

Rx and Tx Octets

Number of received and transmitted (good and bad) bytes. Includes FCS, but

excludes framing bits.

Rx and Tx Unicast

Number of received and transmitted (good and bad) unicast packets.

Rx and Tx Multicast

Number of received and transmitted (good and bad) multicast packets.

Rx and Tx Broadcast

Number of received and transmitted (good and bad) broadcast packets.

Rx and Tx Pause

Counter of the MAC Control frames received or transmitted on this port that have an

opcode indicating a PAUSE operation.

Receive and Transmit Size Counters

Number of received and transmitted (good and bad) packets split into categories

based on their respective frame sizes.

Receive and Transmit Queue Counters

Number of packets received and transmitted by the input and output queues.

-95-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands