KTI Networks KGS-2421 User Manual Download Page 35

Page: 35 / 147

2.3.2.2.3 Access Control Lists

Configuration Description

Ingress Port

Indicates the ingress port of the ACE. Possible values are:

Any:

The ACE will match any ingress port.

Policy:

The ACE will match ingress ports with a specific policy.

Port:

The ACE will match a specific ingress port.

Frame Type

Indicates the frame type of the ACE. Possible values are:

Any:

The ACE will match any frame type.

EType:

The ACE will match Ethernet Type frames. Note that an Ethernet Type based

ACE will not get matched by IP and ARP frames.

ARP

The ACE will match ARP/RARP frames.

IPv4:

The ACE will match all IPv4 frames.

IPv4/

ICMP

The ACE will match IPv4 frames with ICMP protocol.

IPv4/UDP:

The ACE will match IPv4 frames with UDP protocol.

IPv4/TCP:

The ACE will match IPv4 frames with TCP protocol.

IPv4/Other:

The ACE will match IPv4 frames, which are not ICMP/UDP/TCP.

Action

Indicates the forwarding action of the ACE.

Permit:

Frames matching the ACE may be forwarded and learned.

Deny:

Frames matching the ACE are dropped.

Rate Limiter

Indicates the rate limiter number of the ACE. The allowed range is

1 ~ 15

. When

“

Disabled”

is displayed, the rate limiter operation is disabled.

Port Copy

Indicates the port copy operation of the ACE. Frames matching the ACE are copied

to the port number. The allowed values are

Disabled

or a

specific port number

When Disabled is displayed, the port copy operation is disabled.

Logging

Indicates the logging operation of the ACE. Possible values are:

Enabled:

Frames matching the ACE are stored in the System Log.

Disabled:

Frames matching the ACE are not logged.

Please note that the System Log memory size and logging rate is limited.

Shutdown

Indicates the port shut down operation of the ACE. Possible values are:

Enabled:

If a frame matches the ACE, the ingress port will be disabled.

Disabled:

Port shut down is disabled for the ACE.

-35-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands