KTI Networks KGS-2421 User Manual Download Page 121

Page: 121 / 147

3.9 VLAN

3.9.1 VLAN Membership

A VLAN User is a module that uses services of the VLAN management functionality to configure VLAN

memberships and VLAN port configuration such as PVID, UVID. Currently we support following VLAN:

Static:

CLI/Web/SNMP users

NAS: NAS provides port-based authentication, which involves communications between a Supplicant,

Authenticator, and an Authentication Server.

MSTP: The 802.1s Multiple Spanning Tree protocol (MSTP) uses VLANs to create multiple spanning trees

in a network, which significantly improves network resource utilization while maintaining a

loop-free environment.

The VLAN Membership Status Page shall show the current VLAN port members for all VLANs configured by

a selected VLAN User (selection shall be allowed by a Combo Box). When ALL VLAN Users is selected, it

shall show this information for all the VLAN Users, and this is the default. VLAN membership allows the

frames Classified to the VLAN ID to be forwarded to the respective VLAN member ports.

Select a type of VLAN Users

Status Description

VLAN ID

Indicates the ID of this particular VLAN.

Port Members

A row of check marks is displayed for each VLAN ID. The port with check mark is

the member of the associated VLAN ID.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to updates the information, starting from the current entry ID.

-121-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands