KTI Networks KGS-2421 User Manual Download Page 13

Page: 13 / 147

The system Name, Contact, and Location settings are also used as

SNMP

MIBs.

2.1.2 IP & Time

Configuration Description

DHCP Client

Enable the

DHCP

client by checking this box.

IP Address

Provide the

address of this switch unit.

IP Mask

Provide the

mask of this switch unit.

IP Router

Provide the

address of the default router for this switch unit.

VLAN ID

Provide the managed VLAN ID. The allowed range is

through

4095

SNTP Server

Provide the

address of the

SNTP

Server.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Renew

Click to renew

DHCP

. This button is only available if

DHCP

is enabled.

Note:

If DHCP fails and the configured IP address is zero, DHCP will retry. If DHCP fails and the configured IP

address is non-zero, DHCP will stop and the configured IP settings will be used. The DHCP client will

announce the configured System Name as hostname to provide DNS lookup.

The IP addresses should be in dotted decimal notation.

-13-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands