KTI Networks KGS-2421 User Manual Download Page 63

Page: 63 / 147

Add new static entry Click to configure a new static MAC address entry in the

MAC table

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

2.8.1 Static MAC Address Configuration

Screen of 24-Port Switch

Screen of 16-Port Switch

Static MAC Table Configuration

VLAN

The

VLAN ID

for the static MAC address entry.

MAC Address

The MAC address for the entry.

Port Members

Check to indicate which ports are members of the entry. Check or uncheck as needed

to modify the entry.

Delete

Click to delete the entry. It will be deleted during the next save.

Add new static entry Click to configure a new static MAC address entry in the MAC table.

-63-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands