KTI Networks KGS-2421 User Manual Download Page 26

Page: 26 / 147

2.3.1.5.4 Groups

Configuration Description

Delete

Check to delete the entry. It will be deleted during the next save.

Security Model

Indicates the security model that this entry should belong to. Possible security models are:

v1:

Reserved for SNMPv1.

v2c:

Reserved for SNMPv2c.

usm:

User-based Security Model (USM).

Security Name

A string identifying the security name that this entry should belong to. The allowed

string length is 1 to 32, and the allowed content is the ASCII characters from 33 to

126.

Group Name

A string identifying the group name that this entry should belong to. The allowed

string length is 1 to 32, and the allowed content is the ASCII characters from 33 to

126.

Add new group

Click to add a new SNMPv3 group entry as shown below.

Delete

Click to cancel the new entry.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

-26-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands