KTI Networks KGS-2421 User Manual Download Page 87

Page: 87 / 147

System Date

The current (GMT) system time and date. The system time is obtained through the

configured

SNTP

Server, if any.

System Uptime

The period of time the device has been operational.

Switch ID

The switch ID.

Software Version

The software version of the switch

Software Date

The date when the switch software was produced.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to refresh the page; any changes made locally will be undone.

3.1.2 CPU Load

This page displays the CPU load, using a SVG graph. The load is measured as averaged over the last

100ms, 1sec and 10 seconds intervals. The last 120 samples are graphed, and the last numbers are

displayed as text as well. In order to display the SVG graph, your browser must support the SVG

format. Consult the

SVG Wiki

for more information on browser support. Specifically, at the time of

writing, Microsoft Internet Explorer will need to have a plug-in installed to support SVG.

-87-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands