KTI Networks KGS-2421 User Manual Download Page 122

Page: 122 / 147

3.9.2 VLAN Port

Select a type of VLAN Users

Status Description

Port

The logical port for the settings contained in the same row.

PVID

Shows the VLAN identifier for that port. The allowed values are

through

4095

. The

default value is

VLAN Aware

Shows the VLAN Awareness for the port.

If VLAN awareness is enabled, the tag is removed from tagged frames received on

the port. VLAN tagged frames are classified to the VLAN ID in the tag.

If VLAN awareness is disabled, all frames are classified to the Port VLAN ID and

tags are not removed.

Ingress Filtering

Show the ingress filtering for a port. This parameter affects VLAN ingress processing.

If ingress filtering is enabled and the ingress port is not a member of the classified

VLAN of the frame, the frame is discarded.

Frame Type

Shows whether the port accepts all frames or only tagged frames. This parameter

affects VLAN ingress processing. If the port only accepts tagged frames, untagged

frames received on that port are discarded.

Tx Tag

Shows egress filtering frame status whether tagged or untagged.

UVID

Shows UVID (untagged VLAN ID). Port's UVID determines the packet's behavior at

the egress side.

Conflicts

Shows status of Conflicts whether exists or Not. When a Volatile VLAN User

-122-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands