KTI Networks KGS-2421 User Manual Download Page 45

Page: 45 / 147

2.5.2 MSTI Mapping

Configuration Description

Configuration Name

The name identifying the

VLAN

to MSTI mapping

Bridges must share the name and revision (see below), as well as the VLAN-to-MSTI

mapping configuration in order to share spanning trees for MSTI’s. (Intra-region)

The name is at most 32 characters.

Configuration Revision The revision of the MSTI configuration named above. This must be an integer

between

0 ~ 65535

MSTI Mapping

MSTI

The bridge instance

The CIST is not available for explicit mapping, as it will receive the VLANs not

explicitly mapped.

VLANs Mapped

The list of VLAN’s mapped to the MSTI. The VLANs must be separated with

comma and/or space. A VLAN can only be mapped to

one

MSTI. An unused MSTI

should just be left empty. (i.e. not having any VLANs mapped to it.)

-45-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands