manualshive.com logo in svg

KTI Networks KGS-2421, User Manual, Page: 24 / 147

Share
Download
KTI Networks KGS-2421 User Manual Download Page 24

2.3.1.5.3 Users 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Configuration Description 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Delete 

Check to delete the entry. It will be deleted during the next save.   

Engine ID 

An octet string identifying the engine ID that this entry should belong to. The string 

must contain an even number between 10 and 64 hexadecimal digits, but all-zeros 

and all-'F's are not allowed. The SNMPv3 architecture uses the User-based Security 

Model (USM) for message security and the View-based Access Control Model 

(VACM) for access control. For the USM entry, the usmUserEngineID and 

usmUserName are the entry's keys. In a simple agent, usmUserEngineID is always 

that agent's own snmpEngineID value. The value can also take the value of the 

snmpEngineID of a remote SNMP engine with which this user can communicate. In 

othe words, if user engine ID equal system engine ID then it is local user; otherwize 

it's remote user.   

User Name 

A string identifying the user name that this entry should belong to. The allowed string 

length is 1 to 32, and the allowed content is the ASCII characters from 33 to 126.   

Security Level 

Indicates the security model that this entry should belong to. Possible security models 

are:  

NoAuth, NoPriv:

 None authentication and none privacy.   

Auth, NoPriv:

 Authentication and none privacy.   

Auth, Priv:

 Authentication and privacy.   

The value of security level cannot be modified if entry already exists. That means 

must first ensure that the value is set correctly.   

Authentication Protocol  Indicates the authentication protocol that this entry should belong to. Possible 

authentication protocols are:   

None:

 None authentication protocol.   

MD5

:

 An optional flag to indicate that this user using MD5 authentication protocol.   

SHA

:

 An optional flag to indicate that this user using SHA authentication protocol.   

The value of security level cannot be modified if entry already exists. That means 

must first ensure that the value is set correctly.   

Authentication Password  A string identifying the authentication pass phrase. For MD5 authentication protocol, 

-24- 

Summary of Contents for KGS-2421




















































































































































Reviews:

No comments