KTI Networks KGS-2421 User Manual Download Page 66

Page: 66 / 147

sure the box is unchecked. By default, no ports are members, and all boxes are

unchecked.

Delete

Click to delete the new VLAN row.

Add new VLAN

Click to add another new VLAN ID.

Save

Click to save the new VLAN row.

Reset

Click to undo any changes made locally and revert to previously saved values.

2.9.2 VLAN Port Configuration

Configuration Description

Port

This is the logical port number for this row.

VLAN Aware

Enable VLAN awareness for a port by checking the box. This parameter affects

VLAN ingress processing. If VLAN awareness is enabled: the tag is removed from

tagged frames received on the port. Furthermore, VLAN tagged frames are classified

to the VLAN ID in the tag. If VLAN awareness is disabled, all frames are classified

to the Port VLAN ID and tags are not removed. By default, VLAN awareness is

-66-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands