KTI Networks KGS-2421 User Manual Download Page 67

Page: 67 / 147

-67-

disabled (no checkmark).

Ingress Filtering

Enable ingress filtering for a port by checking the box. This parameter affects VLAN

ingress processing. If ingress filtering is enabled and the ingress port is not a member

of the classified VLAN of the frame, the frame is discarded. By default, ingress

filtering is disabled (no checkmark).

Frame Type

Determines whether the port accepts all frames or only tagged frames. This parameter

affects VLAN ingress processing.

All:

all frames are accepted. (Default)

Tagged:

Only tagged frames are accepted. Untagged frames received on the port are

discarded.

Port VLAN Mode

Configures the Port VLAN Mode. This parameter affects VLAN ingress and egress

processing.

None:

a VLAN tag with the classified VLAN ID is inserted in frames transmitted on

the port. This mode is normally used for ports connected to VLAN aware switches.

Specific:

(the default value) a Port VLAN ID can be configured (see below).

Untagged frames received on the port are classified to the Port VLAN ID. If VLAN

awareness is disabled, all frames received on the port are classified to the Port VLAN

ID. If the classified VLAN ID of a frame transmitted on the port is different from the

Port VLAN ID, a VLAN tag with the classified VLAN ID is inserted in the frame.

Port VLAN ID

Configures the VLAN identifier for the port. The allowed values are 1 through 4095.

The default value is 1.

Note: The port must be a member of the same VLAN as the Port VLAN ID.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands