KTI Networks KGS-2421 User Manual Download Page 41

Page: 41 / 147

Group ID

Indicates the group ID for the settings contained in the same row. Group ID

“Normal” indicates there is no aggregation. Only one group ID is valid per port.

Port Members

Each switch port is listed for each group ID. Select a radio button to include a port in

an aggregation, or clear the radio button to remove the port from the aggregation. By

default, no ports belong to any aggregation group. Only full duplex ports can join an

aggregation and ports must be in the same speed in each group.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

2.4.2 LACP

Configuration Description

Port

The port number for which the associated row configuration applies

LACP

Enabled

Controls whether LACP is enabled on this switch port. LACP will form an

aggregation when 2 or more ports are connected to the same partner.

Key

The Key value incurred by the port, range

1- 65535

-41-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands