manualshive.com logo in svg

KTI Networks KGS-2421, User Manual, Page: 96 / 147

Share
Download
KTI Networks KGS-2421 User Manual Download Page 96

-96- 

Receive Error Counters 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Rx Drops 

Number of frames dropped due to lack of receive buffers or egress congestion.   

Rx CRC/Alignment 

Number of frames received with CRC or alignment errors.   

Rx Undersize 

Number of short

 1

 frames received with valid CRC.   

Rx Oversize 

Number of long

 2

 frames received with valid CRC.   

Rx Fragments 

Number of short

 1

 frames received with invalid CRC.   

Rx Jabber 

Number of long

 2

 frames received with invalid CRC.   

Rx Filtered 

Number of received frames filtered by the forwarding process. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Transmit Error Counters 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Tx Drops 

Number of frames dropped due to output buffer congestion.   

Tx Late/Exc. Coll. 

Number of frames dropped due to excessive or late collisions.   

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Port # 

Select the logical port for the displayed statistics 

Auto-refresh 

Check this box to enable an automatic refresh of the page at regular intervals. 

  Refresh     

Click to refresh the page; any changes made locally will be undone. 

  Clear     

Click to flush all counters. 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

 

 

 

 

 

 

 

 

Note: 

1 

Short frames are frames that are smaller than 64 bytes. 

2 

Long frames are frames that are longer than the configured maximum frame length for this port. 

 

Summary of Contents for KGS-2421




















































































































































Reviews:

No comments