-44-
defines the initial value of remaining Hops for MSTI information generated at the
boundary of an MSTI region.
Transmit Hold Count
The number of BPDU’s a bridge port can send per second. When exceeded,
transmission of the next BPDU will be delayed.
Valid values:
1 ~ 10 BPDU’s per second
Advanced Configuration
Edge Port BPDU Filtering Check to configure a port
explicitly
as
Edge
will transmit and receive BPDUs
Edge Port BPDU Guard Control whether a port
explicitly
configured as
Edge
will disable itself upon reception
of a BPDU. The port will enter the
error-disabled
state, and will be removed from the
active topology.
Port Error Recovery
Control whether a port in the
error-disabled
state automatically will be enabled after
a certain time. If recovery is not enabled, ports have to be disabled and re-enabled for
normal STP operation. The condition is also cleared by a system reboot.
Port Error Recovery Timeout The time that has to pass before a port in the
error-disabled
state can be enabled.
Valid values:
30 ~ 86400 seconds (24 hours)
Save
Click to save the changes.
Reset
Click to undo any changes made locally and revert to previously saved values.
Summary of Contents for KGS-2421
