KTI Networks KGS-2421 User Manual Download Page 75

Page: 75 / 147

frame. The following QCE types are supported:

Ethernet Type

The Ethernet Type field. If frame is tagged, this is the Ethernet Type

that follows the tag header.

VLAN ID:

VLAN ID. Only applicable if the frame is VLAN tagged.

TCP/UDP Port:

IPv4 TCP/UDP source/destination port.

DSCP:

IPv4 and IPv6 DSCP.

ToS

The 3 precedence bit in the ToS byte of the IPv4/IPv6 header (also known as

DS field).

Tag Priority:

User Priority

. Only applicable if the frame is VLAN tagged or priority

tagged.

Type Value

Indicates the value according to its QCE type.

Traffic Class

The QoS class associated with the QCE.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Cancel

Click to return to previous page.

-75-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands