KTI Networks KGS-2421 User Manual Download Page 102

Page: 102 / 147

CPU

Forward packet that matched the specific ACE to CPU

CPU Once

Forward the first packet that matched the specific ACE to CPU.

Counter

The counter indicates the number of times the ACE was hit by a frame.

Conflict

Indicates the hardware status of the specific ACE. The specific ACE is not applied to

the hardware due to hardware limitations.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to refresh the page; any changes made locally will be undone.

3.3.2 Auth Server

3.3.2.1 RADIUS Overview

Configuration Description

RADIUS Authentication Servers

The RADIUS server number

Click to navigate to detailed statistics for this server.

IP Address

The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this

server.

Status

The current state of the server

This field takes one of the following values:

Disabled:

The server is disabled.

Not Ready:

The server is enabled, but IP communication is not yet up and running.

Ready:

The server is enabled, IP communication is up and running, and the RADIUS

module is ready to accept access attempts.

Dead (X seconds left):

Access attempts were made to this server, but it did not reply

within the configured timeout. The server has temporarily been disabled, but will get

re-enabled when the dead-time expires. The number of seconds left before this occurs

-102-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands