KTI Networks KGS-2421 User Manual Download Page 52

Page: 52 / 147

Router Port

Specify which ports act as router ports. A router port is a port on the Ethernet switch

that leads towards the Layer 3 multicast device or IGMP querier.

If an aggregation member port is selected as a router port, the whole aggregation will

act as a router port.

Fast Leave

Enable the fast leave on the port.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

2.6.2 VLAN Configuration

VLAN Configuration

Description

Start from VLAN …..

Select range of VLAN table entries.

VLAN ID

The VLAN ID of the entry.

Snooping Enabled

Enable the per-VLAN IGMP Snooping.

IGMP Querier

Enable the IGMP Querier in the VLAN. The Querier will send out if no Querier

received in 255 seconds after IGMP Querier Enabled. Each Querier’s interval is 125

second, and it will stop act as an IGMP Querier if received any Querier from other

devices.

Refresh

Click to refresh the page; any changes made locally will be undone.

|<<

Click to display the first page.

>>|

Click to display the last page.

Save

Click to save the changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

-52-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands