KTI Networks KGS-2421 User Manual Download Page 64

Page: 64 / 147

2.9 VLANs

Up to 64 VLANs are supported. This page allows for adding and deleting VLANs as well as adding and

deleting port members of each VLAN.

2.9.1 VLAN Membership

Screen of 24-Port Switch

Screen of 16-Port Switch

Configuration Description

Start from VLAN …..

Select range of VLAN table entries.

Delete

Check to delete a VLAN entry. The entry will be deleted on the switch unit during

the next Save.

VLAN ID

Indicates the ID of this particular VLAN.

Port Members

A row of check boxes for each port is displayed for each VLAN ID. To include a port

in a VLAN, check the box. To remove or exclude the port from the VLAN, make

sure the box is unchecked. By default, no ports are members, and all boxes are

unchecked.

-64-

Add new entry

Click to add a new VLAN entry. An empty row is added to the table, and the VLAN

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands