KTI Networks KGS-2421 User Manual Download Page 99

Page: 99 / 147

shown.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to refresh the page; any changes made locally will be undone.

3.3.1.1.2 Port

Configuration Description

Port #

Select a port to display.

MAC Address

The MAC address and VLAN ID that is seen on this port. If no MAC addresses are

learned, a single row stating

"No MAC addresses attached"

is displayed.

VLAN ID

ditto

State

Indicates whether the corresponding MAC address is blocked or forwarding. In the

blocked state, it will not be allowed to transmit or receive traffic.

Time of Adding

Show the date and time when this MAC address was first seen on the port.

Age/Hold

If at least one user module has decided to block this MAC address, it will stay in the

blocked state until the hold time (measured in seconds) expires. If all user modules

have decided to allow this MAC address to forward, and aging is enabled, the Port

Security module will periodically check that this MAC address still forwards traffic.

If the age period (measured in seconds) expires and no frames have been seen, the

MAC address will be removed from the MAC table. Otherwise a new age period will

begin. If aging is disabled or a user module has decided to hold the MAC address

indefinitely, a dash (-) will be shown.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to refresh the page; any changes made locally will be undone.

-99-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands