KTI Networks KGS-2421 User Manual Download Page 118

Page: 118 / 147

802.1Q-2003, meaning that only the IEEE 802.1D priority level is significant and the

default PVID of the ingress port is used instead.

Priority

Priority

is the Layer 2 priority to be used for the specified application type.One of

eight priority levels (0 through 7)

DSCP

DSCP

is the DSCP value to be used to provide Diffserv node behavior for the

specified application type as defined in IETF RFC 2474. Contain one of 64 code

point values (0 through 63).

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Click to refresh the page; any changes made locally will be undone.

3.7.3 Port Statistics

Global Status

Description

Neighbor entries were last changed at

Shows the time of the last entry was last deleted or added. It is also shows the time

elapsed since last change was detected.

Total Neighbors Entries Added

Shows the number of new entries added since switch reboot.

-118-

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands