KTI Networks KGS-2421 User Manual Download Page 143

Page: 143 / 147

-143-

the clocks of computer systems. SNTP uses

UDP

(datagrams) as transport layer.

SPROUT

Stack Protocol using ROUting Technology. An advanced protocol for almost instantaneous

discovery of topology changes within a stack as well as election of a master switch.

SPROUT

also calculates parameters for setting up each switch to perform shortest path forwarding

within the stack.

SSID

Service Set Identifier is a name used to identify the particular 802.11 wireless LANs to which

a user wants to attach. A client device will receive broadcast messages from all access points

within range advertising their SSIDs, and can choose one to connect to based on

pre-configuration, or by displaying a list of SSIDs in range and asking the user to select one

(wikipedia).

SSH

is an acronym for Secure SHell. It is a network protocol that allows data to be exchanged

using a secure channel between two networked devices. The encryption used by SSH provides

confidentiality and integrity of data over an insecure network. The goal of SSH was to replace

the earlier rlogin,

TELNET

and rsh protocols, which did not provide strong authentication or

guarantee confidentiality (Wikipedia).

SSM

SyncE

this is an abbreviation for Synchronization Status Message and is containing a

indication.

STP

Spanning Tree Protocol is an OSI layer-2 protocol which ensures a loop free topology for any

bridged LAN. The original STP protocol is now obsolete by

RSTP

Switch ID

s (1-16) are used to uniquely identify the switches within a stack. The Switch ID of

each switch is shown on the display on the front of the switch and is used widely in the web

pages as well as in the CLI commands.

SyncE

Is an abbreviation for Synchronous Ethernet. This functionality is used to make a

network 'clock frequency' synchronized. Not to be confused with real time clock synchronized

(IEEE 1588).

is an acronym for Terminal Acess Controller Access Control System Plus. It is a

networking protocol which provides access control for routers, network access servers and

other networked computing devices via one or more centralized servers. provides

Summary of Contents for KGS-2421




















































































































































Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands

KTI Networks KGS-2421, User Manual

Search results

Summary of Contents for KGS-2421

Reviews:

Related manuals for KGS-2421

Brands by name

Popular brands