manualshive.com logo in svg

Krone Comprima F 125 XC-1, Operating Instructions Manual

Share
Download
Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 96

Start-up

 

 

96 

 

Pos: 39.28 /Überschriften/Überschriften 2/A-E/DDruckluftanschlüsse bei Druckluftbremse @ 0\mod_1201161304258_78.docx @ 51103 @ 2 @ 1 

 

7.6 

Compressed Air Connections for the Compressed Air Brake  

Pos: 39.29 /BA/Sicherheit/2. Vorangestellte Warnhinweise/Warnung - Versagen der Druckluftbremsanlage @ 273\mod_1403777396384_78.docx @ 2056965 @  @ 1 

 

 

WARNING! 
Danger to life due to failure of the brake system or unexpected movement of the 
machine. 

Pneumatic lines that become detached or worn through pneumatic lines will cause the brake 
system to fail. Thus there is a risk of serious injuries or death. 
• 

Lay the pneumatic lines so that they do not rub or tension. Furthermore they should not be 
jammed or touch other parts (e.g. tractor tyres). 

The machine may move unintentionally if the order of the pneumatic lines is interchanged when 
connecting them. Thus there is a risk of serious injuries or death. 
• 

Connect the yellow coupling head first. 

• 

Then connect the red coupling head. 

• 

After having connected the quick couplings, check that they fit perfectly. 

 

Pos: 39.30 /BA/Inbetriebnahme/Druckluftbremse/Sonderausrüstung Druckluftbremse @ 32\mod_1253601707312_78.docx @ 314936 @  @ 1 

 

The machine can optionally be equipped with a dual-line compressed air braking system. 
The coupling heads are connected to the machine for attachment of the reservoir (red) and 
brake line (yellow) of the tractor. 
 

Pos: 39.31 /BA/Sicherheit/Module AchtungWARNUNG - Druckluftbremse Straßenfahrt Fortima V 1500 MC @ 311\mod_1418810904684_78.docx @ 2408485 @  @ 1 

 

 

WARNING! 
Risk of accident due to insufficient brake force. 

• 

For road travel, driving is permitted in position (2) “Full load” only. 

• 

In the “Half load” or “Zero load” position, the braking effect can be adapted (reduced), e.g. 
when working on wet meadows. 

 

Pos: 39.32 /BA/Inbetriebnahme/Druckluftbremse/Druckluftanschlüsse Druckluftbremse Fortima V 1500 MC @ 32\mod_1253601964687_78.docx @ 314965 @  @ 1 

 

1

1

2

CP102220

Fig. 63 
• 

Insert the coloured compressed air hose couplings (1) into the correspondingly coloured 
couplings on the tractor. 

 

 

Note 

Always connect the yellow coupling head first, then the red one. Detach the couplings in 
reverse order.  

 

Pos: 39.33 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Comprima F 125 XC-1























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands