manualshive.com logo in svg

Krone Comprima F 125 XC-1, Operating Instructions Manual

Share
Download
Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 215

 

Maintenance

 

215 

 

Pos: 47.133.6 /Überschriften/Überschriften 3/K-O/KKupplungsköpfe @ 34\mod_1255596655016_78.docx @ 324497 @ 3 @ 1 

 

11.23.1 

Coupling heads (non-interchangeable)  

Pos: 47.133.7 /BA/Wartung/Bremsanlage/Kupplungsköpfe Bild VP @ 34\mod_1255596792281_78.docx @ 324548 @  @ 1 

 

RP-A-031

RP-A-032

"RESERVOIR" coupling head 

(colour red)  

  

"BRAKE" coupling head 

(colour yellow)

 

Fig. 189 

Pos: 47.133.8 /BA/Wartung/Bremsanlage/Kupplungsköpfe_Text @ 34\mod_1255596782360_78.docx @ 324522 @  @ 1 

 

The coupling heads are installed in the dual-line compressed air braking system to connect the 
reservoir and brake line of the tractor with the machine. 
 
• 

After uncoupling, close the cover or connect the coupling heads in the empty couplings 
provided for this purpose so that no dirt can get in them.  

• 

Replace damaged sealing rings. 

• 

Check whether the coupling heads lock into place and make certain there are no leaks.  

• 

Replace faulty heads. 

 

Pos: 47.133.9 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Comprima F 125 XC-1























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands