![Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 113](http://html1.mh-extra.com/html/krone/comprima-f-125-xc-1/comprima-f-125-xc-1_operating-instructions-manual_2004803113.webp)
Operation
113
Pos: 43.31 /Überschriften/Überschriften 3/U-Z/Zusätzliche Auswurfbleche in der Heckklappe montieren @ 489\mod_1484052728157_78.docx @ 3287570 @ 3 @ 1
9.3.3
Mounting additional deflector sheets in the tailgate
Pos: 43.32 /Abkürzungen /Abkürzungen sprachneutral/Rundballenpressen/Comprima F @ 256\mod_1397714206905_0.docx @ 1962642 @ @ 1
Comprima F
Pos: 43.33 /BA/Bedienung /Rundballenpresse/AnlageblecheBild Anlagebleche montieren Comprima F125/155 @ 137\mod_1353912745760_78.docx @ 1222811 @ @ 1
RPN00107_1
1
2
3
Fig. 81
View (closed bale chamber)
Pos: 43.34 /BA/Bedienung /Rundballenpresse/AnlageblecheText Anlagebleche montieren alle Maschinen @ 137\mod_1353912825978_78.docx @ 1222840 @ @ 1
If the completed bales do not fall out of the front bale chamber, two ejector plates (1) can be
assembled right and left in the tailgate of the machine.
•
Install the ejector plates (1) with the screws (2) on the insides of the bale chamber into the
existing bore holes.
•
If the completed bales do even not fall out of the front bale chamber after having installed
the ejector plates (1), remove the sliding plates (3) from the machine housing right and left.
The ejector plates (1) can be ordered with suitable screws from KRONE spare part storage by
stating the following spare parts no.:
Pos: 43.35 /BA/Bedienung /Rundballenpresse/AnlageblecheTabelle Ersatzteile Anlagebleche F125/155 @ 137\mod_1353593714768_78.docx @ 1221214 @ @ 1
Units
Spare part
Ersatzteilnummer
2 Ejector
plate
2754790
Pos: 43.36 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1