manualshive.com logo in svg

Krone Comprima F 125 XC-1, Operating Instructions Manual

Share
Download
Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 17

 

Safety

 

17 

 

Pos: 14.25 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseBetriebssicherheit - Technische Grenzwerte_RP_Schwader_Wender_BiG Pack_Transportwagen @ 494\mod_1488376088355_78.docx @ 3322789 @  @ 1 

 

Technical limit values 

If the technical limit values of the machine are not observed, the machine may be damaged. As 
a result, accidents may occur and people may be seriously injured or killed. Observance of the 
following technical limit values is particularly important for safety: 
– 

Maximum permitted operating pressure of the hydraulics 

– 

Maximum permitted drive speed 

– 

Maximum permitted axle load/axle loads 

– 

Maximum permitted drawbar load 

– 

Maximum permitted axle loads of the tractor 

– 

Maximum permitted transport height and width 

– 

Maximum permitted speed 

 
• 

Observe limit values, see chapter "Technical data". 

 

Pos: 14.26 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Comprima F 125 XC-1























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands