Operation
121
Pos: 43.69.14 /Überschriften/Überschriften 3/A-E/A/Auflagedruckentlastung der Pick-up einstellen @ 345\mod_1434372832641_78.docx @ 2607260 @ 3 @ 1
9.9.3
Adjusting the bearing pressure relief for the pick-up
Pos: 43.69.15 /BA/Einstellungen/Pick-up / Rollenniederhalter/Auflagedruckentlastung der Pick-up einstellen_Bild1_Comprima CF CV RP025 @ 495\mod_1489420092034_78.docx @ 3402928 @ @ 1
COM00528
X
1
2
3
Fig. 90
Pos: 43.69.16 /BA/Einstellungen/Pick-up / Rollenniederhalter/Auflagedruckentlastung der Pick-up einstellen_Text1_Comprima CF CV RP025 @ 495\mod_1489420266972_78.docx @ 3402987 @ @ 1
In order to be able to pass over unevenness better, the pick-up is relieved on both machine
sides by means of the spring (3). The spring (3) can be set on the ring screw (2).
KRONE recommends the following setting:
–
Dimension X (left machine side): 150 mm
–
Dimension X (right machine side): 42 mm
Prerequisite
– Load on the guide wheels is sufficiently relieved.
•
On the left and right machine side, check whether the dimensions stated above match.
•
Screw in or unscrew the nut (1) as much as needed until the dimension X stated above has
been set.
Pos: 43.70 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
