Krone Comprima F 125 XC-1, Operating Instructions Manual

Page: 326 / 374

8 Terminal error messages
8.1 Faults of the electrics/electronics
82
Comprima F 125 - 1, Comprima F 125 XC - 1, Comprima F 155 - 1, Comprima F 155 XC - 1, Comprima V 150 - 1,
Comprima V 150 XC - 1, Comprima V 180 - 1, Comprima V 180 XC - 1, Comprima V 210 XC - 1
Comfort 1.0_en
Possible cause Remedy
The sensor wiring is faulty.
„
Check sensor and wiring for damage, refer to page 64 .
522143-
B43
A
ON
Sensor B43 “Blade group A swivelled in (for the “Hydraulic blade group control system”
version)”
Possible cause Remedy
FMI 4: There is a cable break, cable break/short circuit, general error or undervoltage.
FMI 5: There is a cable break, general error or overload.
The sensor is damaged ex-
ternally.
„
Check sensor and wiring for damage, refer to page 64 .
The sensor wiring is faulty.
522161-
B61
M1
Sensor B61 “Tying 1 (passive)”
Possible cause Remedy
FMI 4: There is a cable break, cable break/short circuit, general error or undervoltage.
FMI 5: There is a cable break, general error or overload.
The sensor is damaged ex-
ternally. „ Check sensor and wiring for damage, refer to page 64 .
The sensor wiring is faulty.
522162-
B62
Sensor B62 “Tying 2 (active)”
Possible cause Remedy
FMI 4: There is a cable break, cable break/short circuit, general error or undervoltage.
FMI 5: There is a cable break, general error or overload.
The sensor is damaged ex-
ternally.
„
Check sensor and wiring for damage, refer to page 64 .
The sensor wiring is faulty.
522300-
M01
M1
Actuator M01 “Motor tying 1 (passive)”
Possible cause Remedy
FMI 5: There is a cable break, general error or overload.
FMI 6: There is a short circuit to ground or amperage is too high.
The actuator is damaged ex-
ternally. „ Check actuator and wiring for damage, refer to page 64 .
The wiring of the actuator is
faulty.
522301-
K01
Actuator K01 “Pick-up”