manualshive.com logo in svg

Krone Comprima F 125 XC-1, Operating Instructions Manual

Share
Download
Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 161

 

Operation

 

161 

 

Pos: 43.102.1 /Überschriften/Überschriften 2/P-T/RReversieren (Ausführung mit Förderrotor) @ 194\mod_1383557494325_78.docx @ 1649783 @ 2 @ 1 

 

9.21 Reversing 

 

Pos: 43.102.2 /BA/Bedienung /Rundballenpresse/Erntegutblockaden entfernen/Warnung - Unkontrollierte Bewegung der Maschine @ 196\mod_1384152827408_78.docx @ 1658910 @  @ 1 

 

 

WARNING! – Unexpected movements of the machine! 

Effect: Injuries or damage to the machine 
• 

Eliminate blockages only when the machine is stopped. Switch off the engine and remove 
the ignition key.  

• 

Start up the machine only when all safety devices are mounted and in proper working 
order. 

 

Pos: 43.102.3 /BA/Bedienung /Rundballenpresse/Reversieren/a) Bei Ausführung mit manueller Reversiereinrichtung @ 181\mod_1377094768943_78.docx @ 1555276 @  @ 1 

 

a) For version with manual reversing device 

Pos: 43.102.4 /BA/Bedienung /Rundballenpresse/Erntegutblockaden entfernen/Zapfwelle und Motor abstellen, Zündschlüssel ziehen @ 181\mod_1377152868819_78.docx @ 1555689 @  @ 1 

 

• 

Switch off the PTO shaft and the engine of the tractor. 

• 

Remove the ignition key. 

Pos: 43.102.5 /BA/Bedienung /Rundballenpresse/Reversieren/Manuell reversieren_Bild @ 194\mod_1383636427177_78.docx @ 1650973 @  @ 1 

 

 

COM00001_1

2

3

1

Fig. 135 
 

Pos: 43.102.6 /BA/Bedienung /Rundballenpresse/Reversieren/Manuell reversieren - Vorgehensweise @ 181\mod_1377153102889_78.docx @ 1555738 @  @ 1 

 

• 

Move the cover (1) to the side. 

• 

Remove the actuating lever (2) from the twine box and attach to the drive shaft for the pick-
up (3) on the right-hand side of the machine. 

• 

Manually turn back the feed rotor with the actuating lever. 

• 

Reset the machine and manually remove any remaining crops from the feed rotor or the 
pick-up. 

 

 

WARNING! - Actuating lever on drive shaft when restarting machine! 

Risk of death or serious injuries, significant property damage. 
• 

Detach actuating lever and place in twine box before restarting the machine. 

 
• 

Remove the actuating lever (2) and place in the twine box. 

• 

Close the cover (1). 

 

Pos: 43.102.7 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Comprima F 125 XC-1























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands