Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 35

Page: 35 / 374

Safety

Pos: 21.28 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 520 1 (2x) Bestell-Nr. @ 296\mod_1412684339647_78.docx @ 2329283 @ @ 1

7) Order No. 939 520 1 (2x)

Pos: 21.29 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /939/939 520 1 Bild/Text @ 200\mod_1385457791955_78.docx @ 1683535 @ @ 1

939 520-1

Danger due to rotating auger.

There is a danger of becoming caught or wrapped around the
rotating auger.
•

Never reach into the rotating auger.

•

Keep a sufficient distance from moving machine parts.

Pos: 21.30 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /942/942 002 4 (4x) Bestell-Nr. @ 219\mod_1391076364640_78.docx @ 1775553 @ @ 1

8) Order no. 942 002 4 (4x)

Pos: 21.31 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /942/942 002 4 Bild/Text @ 189\mod_1381212442497_78.docx @ 1621655 @ @ 1

Danger due to rotating machine parts.

When the machine is running, there is a risk of injury due to
rotating machine parts.
•

Before starting up, move the guards into their protective
position.

Pos: 21.32 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /942/942 360 4 (1x) Bestell-Nr. @ 349\mod_1436186470583_78.docx @ 2623030 @ @ 1

9) Order No. 942 360 4 (1x)

Pos: 21.33 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /942/942 360 4 Bild/Text @ 349\mod_1436186339732_78.docx @ 2622968 @ @ 1

Danger caused by unintended movement of the machine
when opening the tailgate.

Risk of injury due to rolling away or tilting machine.
•

Before opening the tailgate, make sure that the machine is
correctly attached to the tractor.

•

When uncoupling the machine, ensure that the tailgate is
closed.

Pos: 21.34 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /27 010/27 010 182 1 (2x) Bestell-Nr. @ 348\mod_1435741234866_78.docx @ 2617854 @ @ 1

10) Order no. 27 010 182 1 (2x)

Pos: 21.35 /BA/Sicherheit/4. Sicherheitsaufkleber/EU - ISO /27 010/27 010 182 1 Bild/Text @ 348\mod_1435741417966_78.docx @ 2617956 @ @ 1

Danger caused by tensioned spring.

Risk of injury due to ejected machine parts.
•

Never loosen the screw connection.

Pos: 21.36 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

942 360 4

Summary of Contents for Comprima F 125 XC-1























































































































































































































































































































































































Search results

Summary of Contents for Comprima F 125 XC-1

Reviews:

Brands by name

Popular brands

Krone Comprima F 125 XC-1, Operating Instructions Manual

Search results

Summary of Contents for Comprima F 125 XC-1

Reviews:

Brands by name

Popular brands