Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 14 | Manualshive

Page: 14 / 374

Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 14

Safety

14

Pos: 14.1 /Überschriften/Überschriften 2/F-J/GGrundlegende Sicherheitshinweise @ 186\mod_1380009482364_78.docx @ 1606585 @ 2 @ 1

3.4 Basic

safety

instructions

Pos: 14.2 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Nichtbeachtung der SiHi und WaHi (Einführtext Grundlegende SiHi)_fuer alle @ 175\mod_1372834139379_78.docx @ 1504793 @ @ 1

Non-compliance with the safety instructions and warnings

Non-compliance with the safety instructions and warnings may result in injuries and damage to
the environment and property.

Pos: 14.3 /Überschriften/Überschriften 3/A-E/B/Bedeutung der Betriebsanleitung @ 186\mod_1380011391583_78.docx @ 1606670 @ 3 @ 1

3.4.1

Importance of the operating instructions

Pos: 14.4 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseBedeutung der Betriebsanleitung_fuer alle @ 451\mod_1462796255723_78.docx @ 3064819 @ @ 1

The operating instructions are an important document and a part of the machine. They are
aimed at the user and contain safety-relevant information.
Only the procedures indicated in the operating instructions are reliable. If the operating
instructions are not observed, people may be seriously injured or killed.
•

Before using the machine for the first time, read and follow all the “Basic Safety Instructions”
in the Safety chapter.

•

Before working, also read and observe the respective sections in the operating instructions.

•

Keep the operating instructions ready to hand for the user of the machine.

•

Hand over the operating instructions to subsequent users.

Pos: 14.5 /Überschriften/Überschriften 3/P-T/PPersonalqualifikation @ 187\mod_1380011550253_78.docx @ 1606703 @ 3 @ 1

3.4.2 Personnel

qualification

Pos: 14.6 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Personalqualifikation_BA_fuer alle @ 176\mod_1372840611484_78.docx @ 1505639 @ @ 1

If the machine is not used properly, people may be seriously injured or killed. To avoid
accidents, each person who works with the machine must satisfy the following minimum
requirements:
–

He is physically capable of controlling the machine.

–

He can work safely with the machine in accordance with these operating instructions.

–

He understands the method of operation of the machine within the scope of his work and
can identify and avoid the dangers associated with the work.

–

He has read the operating instructions and can implement the information in the operating
instructions accordingly.

–

He is familiar with driving vehicles safely.

–

For road travel he has adequate knowledge of the highway code and has the stipulated
driving licence.

Pos: 14.7 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
12
13
14
15
16
...
»

Summary of Contents for Comprima F 125 XC-1























































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands