Krone Comprima F 125 XC-1, Operating Instructions Manual

Page: 309 / 374

Terminal error messages 8
Faults of the electrics/electronics 8.1
Comprima F 125 - 1, Comprima F 125 XC - 1, Comprima F 155 - 1, Comprima F 155 XC - 1, Comprima V 150 - 1,
Comprima V 150 XC - 1, Comprima V 180 - 1, Comprima V 180 XC - 1, Comprima V 210 XC - 1
Comfort 1.0_en
65
Possible cause Remedy
FMI 19: There is a network/CAN error.
The wiring is faulty. „
Check wiring, refer to page 64 .
The operating terminal is de-
fective. „ Note the error number and the FMI. Then contact the
dealer.
520194-
KBT
KRONE operating terminal (KOT)
Possible cause Remedy
FMI 19: There is a network/CAN error.
The wiring is faulty. „
Check wiring, refer to page 64 .
The operating terminal is de-
fective. „ Note the error number and the FMI. Then contact the
dealer.
520195-
KBT
KRONE operating terminal (KOT)
Possible cause Remedy
FMI 19: There is a network/CAN error.
The wiring is faulty.
„
Check wiring, refer to page 64 .
The operating terminal is de-
fective.
„
Note the error number and the FMI. Then contact the
dealer.
520198-
EEPROM
EEPROM of KRONE Machine Controller (KMC)
Possible cause Remedy
FMI 12: There is an internal error.
The control unit KMC is de-
fective. „
The control unit KMC is defective.
„
Note the error number and the FMI. Then contact the
dealer.
521100-
High
Voltage group (UB1) of the KRONE Machine Controller (KMC)
Possible cause Remedy
FMI 3: There is a short circuit or an overvoltage.
The cabling is faulty.
„
Check the cabling for damage, refer to page 64 .
One or several sensors/actu-
ators connected to the voltage
group are defective. „ An overview of the position of the sensors, actuators and
control units is provided in the circuit diagram, see appendix
“Circuit diagram”.
„ Check the sensor and cabling for damage, refer to page 64 .
The control unit KMC is de-
fective.
„
Replace the control unit KMC.
521100-
Low
Voltage group (UB1) of the KRONE Machine Controller (KMC)