6
Terminal machine functions
6.6
Adjusting the baling pressure
30
Comprima F 125 - 1, Comprima F 125 XC - 1, Comprima F 155 - 1, Comprima F 155 XC - 1, Comprima V 150 - 1,
Comprima V 150 XC - 1, Comprima V 180 - 1, Comprima V 180 XC - 1, Comprima V 210 XC - 1
Comfort 1.0_en
6.6
Adjusting the baling pressure
Comprima F
50
%
1
100
75
50
25
0
125cm
5
∑
1
55 %
100
75
50
25
0
50
%
55 %
1
2
EQG003-038
1 Adjusted target baling pressure in %
2 Actual baling pressure in %
Adjusting the baling pressure via the scroll wheel
Select the blue value to be changed using the scroll wheel.
ð
The icon is shown in reverse colours.
Press the scroll wheel.
ð
An input field opens.
To increase or reduce the value, turn the scroll wheel.
To save the value, press the scroll wheel.
ð
The setting is accepted, the input field closes.
Adjusting the baling pressure via the touch-capable display
Tap the blue value to be changed.
ð
An input field opens.
Enter the desired value and press
.
ð
The value is saved and the input field exited.
6.7
Operating the hydraulic blade group control system
The hydraulic blade group control system can be used to centrally switch the blades in two
groups A and B without having to install or remove them. From the tractor’s seat, it is possible to
swivel in or out half the set of blades (blade group A or B) or the complete set of blades (blade
groups A and B).
The following functions of the blade group control system can be selected. The set function is
shown in the status line of the display. The key or grey area at the key shows the icons in this
sequence each time a key is pressed.
