Settings
166
Pos: 45.19 /BA/Einstellungen/Rundballenpresse/Bindematerialbremse einstellen_Verriegelungsbolzen_bild_Netz- und Folienbindung_ALLE Comprima @ 470\mod_1471522026393_78.docx @ 3178499 @ @ 1
COM00474
3
3
I
II
1
2
1
2
4
4
Fig. 139
Pos: 45.20 /BA/Einstellungen/Rundballenpresse/Bindematerialbremse einstellen_Verriegelungsbolzen_text_Netz- und Folienbindung_ALLE Comprima @ 470\mod_1471522089960_78.docx @ 3178530 @ @ 1
Position (I) (net tying):
The locking pin with the ball head (3) is unlocked. The clamping
lever (2) rests on the net roll (1).
Position (II) (film tying):
The locking pin with the ball head (3) is locked. This holds the
clamping lever (2) down so that it does not touch the film roll (1).
From position (I) to position (II)
•
To lock the locking pin with the ball head (3) for film tying, turn the ball head clockwise until
the clamping sleeve (4) moves through the slot.
The compression spring automatically presses the bolt into the borehole.
From position (II) to position (I)
•
To unlock the locking pin with the ball head (3) for net tying, turn the ball head anti-
clockwise and pull the bolt in the direction of the arrow until the clamping sleeve (4) moves
through the slot and the bolt engages.
Pos: 45.21 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
