manualshive.com logo in svg

Krone Comprima F 125 XC-1, Operating Instructions Manual

Share
Download
Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 210

Maintenance

 

 

210 

 

Pos: 47.127.12 /BA/Sicherheit/7. Gefahrenhinweise alt/Rundballenpresse/WARNUNG - Messermontage Hilfswerkzeug @ 308\mod_1416901860397_78.docx @ 2390596 @  @ 1 

 

 

WARNING! - Blades are pretensioned with spring force! 

High risk of injury when attaching or removing the blades.  
• 

Never press the blades manually into working position. Always use a tool (for example a 
hammer). 

 

Pos: 47.127.13 /BA/Einstellungen/Schneidwerk/Messer wechseln CF/CV @ 388\mod_1445347429112_78.docx @ 2777998 @  @ 1 

 

Changing the blades 

KRS-1-015_1

1

2

Fig. 184 
• 

Remove blade (1). 

 

 

Note 

When inserting the blades (1), ensure that they are positioned correctly on the blade control 
shaft and are centred in the slot (2). 

 
• 

Insert new or ground blade (1). 

 

 

Note 

Before raising the blade cassette, check whether all blades (1) are in alignment and thus 
correctly installed. 

 

Pos: 47.127.14 /BA/Sicherheit/7. Gefahrenhinweise alt/Rundballenpresse/Hinweis Blindmesser @ 388\mod_1445347560339_78.docx @ 2778033 @  @ 1 

 

 

Note 

If the cutting unit is not switched on for a longer period, the cutting blades can be replaced by 
dummy blades in order to avoid soiling of blade cassette slots and wear of blades. 
The dummy blades can be ordered from the KRONE spare part storage by stating part 
number 20 065 405*. 

 

 

Pos: 47.127.15 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Comprima F 125 XC-1























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands