Korg NAUTILUS Series, Parameter Manual, Page: 98 / 961

PROGRAM mode: HD-1
88
Off (unchecked): When Stop is Off , the LFO will function
normally.
Reset AMS [List of AMS Sources]
This selects an AMS source to reset the LFO to the Start
Phase. The LFO resets when the AMS value passes the
halfway mark: +50 for most AMS sources, or 64 for MIDI
controllers.
To create an effect similar to the per-voice LFO’s Key Sync
Off setting, set this to Gate 1+ Damper .
Offset [–99…+99]
By default, almost all of the LFO waveforms are centered
around 0, and then swing all the way from
–99 to +99. This parameter lets you shift the LFO up and
down, so that–for instance–it’s centered on 50, and then
swings from –49 to +149.
For a complete description, please see the entry under LFO1
“Offset,” on page 84.
5–9b: Frequency Modulation
These parameters are identical to the Frequency Modulation
settings for LFO1, as described under “5–1b: Frequency
Modulation,” on page 85.
5–9c: Frequency MIDI/Tempo Sync
These parameters are identical to the Frequency
MIDI/Tempo Sync for LFO1, as described under “5–1c:
Frequency MIDI/Tempo Sync,” on page 85.
v 5–9: Page Menu Commands
• Compare → p.112
• Write Program → p.112
• Exclusive Solo → p.113
• PAGE → p.126
• MODE → p.126