manualshive.com logo in svg

Korg NAUTILUS Series, Parameter Manual, Page: 374 / 961

Share
Download
Korg NAUTILUS Series Parameter Manual Download Page 374

EXi: EP-1 MDS Electric Piano

364

4–2: Oscillator

4–2a: Harmonic Sound

Level

[000…100]

This controls the volume level of the main pitched part of the 
sound.

AMS

[List of AMS Sources]

This selects an AMS source to control the 

Harmonic Sound 

Level

. For a list of AMS sources, see “Alternate Modulation 

Source (AMS) List” on page 901.

Intensity

[–100…+100]

This controls the depth and direction of the 

Harmonic 

Sound Level 

AMS modulation.

Decay

[–100…+100]

This controls the decay time, including both the timbre and 
the level.

AMS

[List of AMS Sources]

This selects an AMS source to control the 

Decay

. For a list 

of AMS sources, see “Alternate Modulation Source (AMS) 
List” on page 901.

Intensity

[–100…+100]

This controls the depth and direction of the 

Decay 

AMS 

modulation.

Release

[–100…+100]

This controls the release time, including both the timbre and 
the level.

AMS

[List of AMS Sources]

This selects an AMS source to control the 

Release

. For a list 

of AMS sources, see “Alternate Modulation Source (AMS) 
List” on page 901.

Intensity

[–100…+100]

This controls the depth and direction of the 

Release 

AMS 

modulation.

4–2b: Attack & Release Noises

Attack Noise Level

[0…100]

This controls the volume level of the attack noise.

AMS

[List of AMS Sources]

This selects an AMS source to control the 

Attack Noise 

Level

. For a list of AMS sources, see “Alternate Modulation 

Source (AMS) List” on page 901.

Intensity

[–100…+100]

This controls the depth and direction of the 

Attack Noise 

Level 

AMS modulation.

Release Noise Level

[0…100]

This controls the volume level of the release noise. This 
level is also scaled by the volume of the harmonic sound at 
the time of release.

AMS

[List of AMS Sources]

This selects an AMS source to control the 

Release Noise 

Level

. For a list of AMS sources, see “Alternate Modulation 

Source (AMS) List” on page 901.

Intensity

[–100…+100]

This controls the depth and direction of the 

Release Noise 

Level 

AMS modulation.

Attack Brightness

[-18.0…+00.0…+18.0]

This controls the brightness of the attack noise.

4–2PMC

4–2a

4–2b

4–2c

Summary of Contents for NAUTILUS Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments