Korg NAUTILUS Series, Parameter Manual, Page: 502 / 961

SEQUENCER mode
492
3–3: MIDI Filter3
3–3a: MIDI Filter 3
Track 01 (Track Number)
Enable SW1 [Off, On]
Enable SW2 [Off, On]
Specifies whether or not the effect of the SW1 and SW2
buttons will be received.
The function of these buttons is specified in the EQ/X-
Y/Controllers– Controllers page.
These settings are valid if these keys are assigned to SW1
Mod. (CC#80), SW2 Mod. (CC#81), or Portamento SW
(CC#65).
Enable Foot Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be received. The function is assigned in
GLOBAL > Controllers/Scales– Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Foot Pedal [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be received. The function is assigned in
GLOBAL > Controllers/Scales– Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Other Control Change Messages [Off, On]
Specifies whether or not MIDI control messages not covered
in the preceding items MIDI Filter will be received.
Track 02…16 (Track Number)
These are the MIDI Filter 3 settings for MIDI tracks 2
through 16. They are the same as for track 1, as described
above.
v 3–3: Page Menu Commands
• Compare → p.112
• Memory Status → p.521
• Exclusive Solo → p.113
• Rename Song → p.521
• Initialize Song → p.522
• Copy From Song → p.522
• Load Template Song → p.522
• Save Template Song → p.523
• FF/REW Speed → p.523
• Set Location (for Locate Key) → p.523
• GM Initialize → p.523
• Copy from Combi → p.525
• Copy From Program → p.525
• PAGE → p.126
• MODE → p.126
0–1a
1–1b
3–3PMC
3–3a