Korg NAUTILUS Series, Parameter Manual, Page: 417 / 961

COMBINATION > Timbre Parameters 2–2: OSC
407
Max # of Notes [Dynamic, 1…16]
Dynamic is the default. With this setting, you can play as
many notes as the system allows.
1-16 lets you limit the maximum number of notes played by
the Timbre. Voices will still be allocated dynamically, up to
this maximum number. You can use this to:
• Model the voice-leading of vintage synthesizers, such as
the Polysix
• Control the resources required by the Timbre, so that
more voices can play on other Timbres
Max # of Notes applies only when the Program’s Voice
Assign Mode is set to Poly , or when Force Osc Mode has
been set to Poly . With Mono , it has no effect.
This setting does not limit the Unison Number of Voices .
For instance, if Max # of Notes is set to 6 , and Unison
Number of Voices is set to 3 , you can play up to 6 notes,
each with 3 Unison voices.
In double Programs, the Max # of Notes applies equally to
both OSC or EXi. For instance, if Max # of Notes is set to 4 ,
you can play up to 4 notes on each OSC/EXi .
Timbres 02…16
Here you can make voice assignment settings for timbres 2
through 16. The settings are the same as for timbre 1. See
“Timbre 01”.
v 2–2: Page Menu Commands
• Compare → p.112
• Write Combination → p.433
• Exclusive Solo → p.113
• Copy From Program → p.433
• PAGE → p.126
• MODE → p.126