Korg NAUTILUS Series, Parameter Manual, Page: 380 / 961

EXi: EP-1 MDS Electric Piano
370
Insert Effects
The parameters vary depending on the selected effect.
Small Phase
This classic phaser, made in New York City during the 70s,
has a notably warm and rich tone with liquid transparency.
Speed [Hz] [0.10…10.00]
This controls the speed of the phaser’s LFO. The default is
0.56 Hz.
Source [List of Dmod Sources]
This selects a mod source to control the Speed . For a list of
Dmod sources, see the “Dynamic Modulation Source List”
on page 910.
Amount [–10.0…+10.0]
This controls the depth and direction of the Speed
modulation.
Color [Off, On]
This changes the sound of the phaser between a full and
round phase shift when set to
Off , and a more pronounced
effect when set to On .
OUTPUT
Wet/Dry [Dry, 1:99…99:1, Wet]
Sets the balance between the “wet” processed sound and the
dry input.
Source [List of Dmod Sources]
This selects a modulation source to control the Wet/Dry
balance.
Amount [–100…+100]
This controls the depth and direction of the Wet/Dry
modulation.
Orange Phase
This phaser pedal is a favorite on many recordings. It’s
useful for adding sparkle, animating chord passages, and
widening and fattening the sound.
The original had only a speed control; this version adds
depth, control of the center frequency, and more.
Speed [Hz] [0.10…10.00]
This controls the speed of the phaser’s LFO. The default is
1.00 Hz.
Source [List of Dmod Sources]
This selects a modulation source to control the Speed . For a
list of Dmod sources, see the “Dynamic Modulation Source
List” on page 910.
Amount [–10.0…+10.0]
This controls the depth and direction of the Speed
modulation.
Depth [0…100]
Sets the depth of LFO modulation.
Source [List of Dmod Sources]
This selects a modulation source to control the LFO
modulation
Depth .
Amount [–100…+100]
This controls the depth and direction of the Depth
modulation.
Resonance [000…100]
This controls the intensity of the phaser effect. The default is
26. Mixing the processed and dry signals via
Wet/Dry will
enhance the effect.
Manual [1…100]
This sets the center frequency of the phaser. The default is
45.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
“OUTPUT” on page 370.
Black Phase
Inspired by a classic European phaser pedal.
Speed [Hz] [0.10…10.00]
This controls the speed of the phaser’s LFO. The default is
1.0Hz.
Source [List of Dmod Sources]
This selects a modulation source to control the Speed . For a
list of Dmod sources, see the “Dynamic Modulation Source
List” on page 910.
Amount [–10.0…+10.0]
This controls the depth and direction of the Speed
modulation.
Depth [0…100]
Sets the depth of LFO modulation.
Source [List of Dmod Sources]
This selects a modulation source to control the LFO
modulation
Depth .
Amount [–100…+100]
This controls the depth and direction of the Depth
modulation.
Resonance [000…100]
This controls the intensity of the phaser effect. The default is
26. Mixing the processed and dry signals via
Wet/Dry will
enhance the effect.
Manual [1…100]
This sets the center frequency of the phaser. The default is
45.
OUTPUT
This is the standard effects output section, with modulatable
control over wet/dry balance. For more information, see
“OUTPUT” on page 370.