Korg NAUTILUS Series, Parameter Manual, Page: 416 / 961

COMBINATION mode
406
2–2: OSC
These settings specify how each Timbre will be played.
2–2a: OSC
Timbre 01
Force OSC Mode [PRG, Poly, Mono, Legato]
This lets you override the Program’s stored Voice Assign
Mode settings, if desired.
PRG: The Program’s stored Voice Assign Mode settings
will be used. HD-1 programs will use the “1–1c: Voice
Assign Mode” settings, and EXi programs will use the “EXi
Common 4–1c” settings.
Poly: The timbre will play polyphonically, regardless of the
Program’s settings.
Mono: The timbre will play monophonically, regardless of
the Program’s settings.
Legato: The timbre program will sound monophonically,
and will play legato according to the Program’s Mode
setting (PROGRAM 1–1b).
With the Mono or Legato settings, the Program’s Priority
setting (PROGRAM 1–1c) will determine the priority of the
note that sounds when you play two or more notes.
EXi programs will ignore this setting if the program does
not support the Voice Assign Mode specified by the
selected Instrument Type.
AL-1: Poly, Mono, and Legato are supported.
CX-3: Poly and Mono are supported (Legato will operate
as Mono)
If different Instrument Types are selected for EXi1 and 2,
Mono and Legato settings will be valid only if the type is
supported by both.
OSC Select [Both, OSC1, OSC2]
Specifies whether the timbre’s program will play OSC1
(EXi1), OSC2 (EXi2), or both.
For HD-1 programs whose Oscillator Mode (PROGRAM
1–1b) is Double, this setting lets you specify that only OSC1
or OSC2 will sound. For EXi programs in which EXi1 and
EXi2 are not turned off in the Instrument Type (EXi
Common 4–1), this setting lets you specify that only EXi1 or
EXi2 will sound.
Both: OSC1 and 2 (or EXi1, 2) will sound as specified by
the settings of the program.
OSC1: Only OSC1 (EXi1) will sound.
OSC2: Only OSC2 (EXi2) will sound. HD-1 programs will
not sound if Oscillator Mode is set to Single or Drums. EXi
programs will not sound if EXi2 is turned Off in the
Instrument Type.
Portamento [PRG, Off, 001…127]
This controls the Timbre’s portamento.
PRG: Portamento will be applied as specified by the
Program settings.
Off: Portamento will be off, even if the original Program
settings specified for it to be on.
001…127: Portamento will be applied with the portamento
time you specify here, even if it is turned off by the program
settings.
Note: not all EXi support portamento, as detailed below;
if they do not, then this parameter will be ignored.
AL-1, STR-1, MS-20EX, and MOD-7: portamento is
supported
CX-3, PolysixEX, SGX-2, EP-1: portamento is not
supported
This parameter can be controlled via MIDI CCs #05 and
#65 (portamento time and on/off switch, respectively),
subject to two conditions:
First, the Timbre’s Status must be set to INT . For more
information, see “Status” on page 379.
Second, if Portamento is set to PRG , only CC#65
(on/off switch) will apply. CC#05 will be ignored.
2–2PMC
2–2a
1–1a
1–1b