Korg NAUTILUS Series, Parameter Manual, Page: 78 / 961

PROGRAM mode: HD-1
68
AMS (Filter EG) [List of AMS Sources]
This selects any AMS modulation source to scale the amount
of the Filter EG applied to Filters A and B. The two filters
share a single AMS source, with separate intensity settings.
Otherwise, the AMS modulation will work in the same way
as the
Velocity to A parameter, described above.
For a list of AMS sources, see “Alternate Modulation Source
(AMS) List” on page 901.
Intensity to A [–99…+99]
This controls the depth and direction of the EG AMS
modulation for Filter A.
Intensity to B [–99…+99]
This controls the depth and direction of the EG AMS
modulation for Filter B.
3–2c: Filter A/B Modulation
This section lets you assign any two AMS sources to control
Filter A, and another two AMS sources to control Filter B.
This modulation is added to the basic Filter A and B cutoff
frequencies, as set on the Filter 1 page.
Filter A
AMS1 [List of AMS Sources]
This selects the first modulation source for controlling Filter
A’s cutoff frequency. For a list of AMS sources, see
“Alternate Modulation Source (AMS) List” on page 901.
Intensity (AMS1) [–99…+99]
This controls the depth and direction of AMS1.
AMS2 [List of AMS Sources]
This selects the second modulation source for controlling
Filter A’s cutoff frequency. For a list of AMS sources, see
“Alternate Modulation Source (AMS) List” on page 901.
Intensity (AMS2) [–99…+99]
This controls the depth and direction of AMS2.
Filter B
The parameters for Filter B are identical to those for Filter A.
For more information, see the descriptions under Filter A,
above.
v 3–2: Page Menu Commands
• Compare → p.112
• Write Program → p.112
• Exclusive Solo → p.113
• Copy Oscillator → p.119
• Swap Oscillator → p.119
• PAGE → p.126
• MODE → p.126